Run RangeVision ScanCenter NG.

If the scanner is not connected or drivers aren't installed, an indication will appear on the Start Screen, as shown below:

7.png

Check the connection of cables, power supply, and then click Update. If you are sure

that all the components of the scanner are connected correctly and the connection

error persists, manually select hardware in Hardware settings. If necessary, contact the technical support of your reseller. If the scanner is not connected intentionally and none of the components can be found, only the processing functions of ScanCenter NG will be available.

In the case if all the settings are correct, after starting the program, you should see the image from the cameras in the main application window.

<aside> <img src="https://prod-files-secure.s3.us-west-2.amazonaws.com/8ca938ed-6224-409f-b7f2-45ec058446c1/4736a4e4-b9cf-475a-ac45-4ae79d3e48e6/Exclamation-mark---cropped.png" alt="https://prod-files-secure.s3.us-west-2.amazonaws.com/8ca938ed-6224-409f-b7f2-45ec058446c1/4736a4e4-b9cf-475a-ac45-4ae79d3e48e6/Exclamation-mark---cropped.png" width="40px" />

To correctly identify a scanner, a necessary condition is that there are no other scanners, computer vision cameras or other license keys connected to the PC.

</aside>

8.png

9.png

For normal operation, some scanner models requires warming up. If the cameras aren't warmed up enough, the program at startup will notify you about it.

10.png

After warming up the value of the current temperature of the cameras is shown in the Toolbar while hovering over the icon.

11.png

<aside> ◀️ Previous

</aside>

<aside> ▶️ Next

</aside>