Thank you for choosing RangeVision product.

Please read this manual before using RangeVision 3D scanner. Here are described the procedures for preparing the scanner, installing the required drivers, calibration procedure, scanning procedure, and tips for acquiring high-quality three-dimensional object model.

Information may be amended from time to time. These changes will be inserted into the new versions of the manual, or in the additional documents and publications.

Exclamation-mark---cropped.png

<aside> <img src="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/b262205b-0bbc-4340-bcc9-1423d8920c8d/Blank_-_Spacer.png" alt="https://s3-us-west-2.amazonaws.com/secure.notion-static.com/b262205b-0bbc-4340-bcc9-1423d8920c8d/Blank_-_Spacer.png" width="40px" /> WARNING!

  1. Turn off the main power at least several minutes after turning off the projector. In case of immediate power shutdown, projecting module mirrors cooling will stop, which can lead to its failure.
  2. Do not expose the scanner to liquids.
  3. Do not use liquid cleaners or aerosol cleaners.
  4. Do not store or use the scanner in dusty or humid environments.
  5. Do not expose the scanner and its components to contamination, shock or drops.
  6. Do not connect power to a faulty wall outlet.
  7. Do not aim the scanner at people and animals in order to avoid directing the bright projectors light at the eyes.
  8. Patterns and holes are provided for ventilation of the scanner to ensure its reliable operation and to prevent overheating. Do not block or cover the openings.

</aside>

Specifications

Technical specifications:

System requirements

Preparing for work

<aside> ◀️ Previous

</aside>

<aside> ▶️ Next

</aside>